Litho Process Karl Suss MA6 - Status: Available
|
Description: The Karl Suss MA-6 Contact Aligner system can perform precision mask-to-wafer (sample) 1:1 contact printing in four modes; hard contact, soft contact, vacuum and proximity. It can accommodate exposure of irregularly shaped substrates and standard wafers to 6”.
Features:
Contact 1:1 aligner.
DUV and IR capability
Approximate Exposure Intensity: 8 mW/cm2@365 nm, 5 mW/cm2@405 nm
Constant exposure intensity controller
Two mask holder sizes are available, 4" and 5".
Wafer size is 4" and pieces.
Maximum wafer thickness 4.3mm
Split field microscope for top-side viewing/alignment.
resolution = down to .8um in vacuum contact mode @ 400nm
The use of the developer station (not tracked/charged) is built into the charge rate. Photolithography wiki link Photoresist wiki link Microfabrication wiki link |
Contact Level | Name | |
---|---|---|
1 | Lewis, Bill | walewis@ufl.edu |
2 | Hays, David | dhays@nimet.ufl.edu |
General Contact: nrfinfo@mail.ufl.edu
An active Gatorlink login is required to create a new reservation.