Litho Process Karl Suss MA6 - Status: Down
|
Description: The Karl Suss MA-6 Contact Aligner system can perform precision mask-to-wafer (sample) 1:1 contact printing in four modes; hard contact, soft contact, vacuum and proximity. It can accommodate exposure of irregularly shaped substrates and standard wafers to 6”.
Features:
Contact 1:1 aligner.
DUV and IR capability
Approximate Exposure Intensity: 8 mW/cm2@365 nm, 5 mW/cm2@405 nm
Constant exposure intensity controller
Two mask holder sizes are available, 4" and 5".
Wafer size is 4" and pieces.
Maximum wafer thickness 4.3mm
Split field microscope for top-side viewing/alignment.
resolution = down to .8um in vacuum contact mode @ 400nm
The use of the developer station (not tracked/charged) is built into the charge rate. Photolithography wiki link Photoresist wiki link Microfabrication wiki link |
To select the time for your reservation, click on the calendar at the desired start time and drag to the desired end time. If you are logged in, the reservations will display the names of the reservation users. Note: If the calendar is down, the following link may also be used to create a reservation: Create Reservation (Quick Form)
An active Gatorlink login is required to create a new reservation.