S/TEM - FEI Tecnai F20 - Status: Down
General Information
- Current Status:
- Down
- Use Rates:
- External Academic & Government:
- $114.60/Hour
- External Affiliated Commercial/Industrial:
- $199.00/Hour
- External Commercial/Industrial:
- $265.00/Hour
- External International Academic:
- $152.90/Hour
- Internal Standard:
- $76.40/Hour
- Service:
- Request Service Quote. The Staff rate is $50/hour (Internal) and $55 /hour (External) in addition to the instrument rate.
- Building:
- NRB (0557)
- Room:
- Room (8B)
- In Cleanroom:
- No
- Main Contact:
- Nicholas Rudawski
Description
*THIS INSTRUMENT IS INTENDED FOR RADIOACTIVE MATERIALS WORK ONLY*
*USERS WORKING ON CONVENTIONAL MATERIALS SHOULD REQUEST TRAINING ON THE TALOS HERE*
The FEI Tecnai F20 S/TEM is a state-of-the-art field emission gun scanning/transmission electron microscope capable of providing micro- to sub nm-scale structural, morphological, and chemical information.
- Configured for 80 or 200 (default) kV operation
- S-FEG Schottky field emission gun
- Super-twin objective lens (Cs = 1.2 mm at 200 kV)
- FEI single-tilt and high-visibility, low-background double-tilt (hex ring) holders available
- Bottom-mounted Gatan UltraScan 1000P 4 megapixel CCD camera
- Fischione Instruments Model 3000 HAADF-STEM detector
- High-resolution (lattice) imaging with <0.1 nm information limit (at 200 kV)
- 0.16 nm STEM resolution (at 200 kV)
- EDAX r-TEM super ultra-thin window Si(Li) energy dispersive spectroscopy system (30 square mm detector area) for chemical analysis via detection of X-rays.
YouTube videos demonstrating instrument operation and other S/TEM concepts
TRAINING REQUIREMENTS:
1. Please create an NRF user account with a PI-approved funding source.
2. Please complete NRF general safety training.
3. Please complete the S/TEM Prerequisite Training online course through eLearning; submit a training request using the "Training" link at the bottom of the page and follow the instructions to be added to the course; this course must be completed regardless of any prior coursework or operational experience related to S/TEM you may have.
4. Users working on radioactive materials must also complete the Radiation Safety Source Course (2.0).
5. Users working on radioactive materials must also obtain a personal dosimeter badge.
An active Gatorlink login is required to create a new reservation.
