Litho Process Laurell Spinner E-Beam Bay & Hot Plate/Oven - Status: Available
|
Description: The E-beam Bay Laurell Spinner is used to manually apply PMMA ONLY. NO OTHER MATERIALS MAY BE USED.
The use of photoresist support equipment (not tracked/ charged) is built into the spinner charge rate. Support equipment includes: HMDS hotplate, soft bake hotplates, hard bake hotplates and ovens. Spin Coating wiki link Photolithography wiki link Photoresist wiki link Microfabrication wiki link |
Use Prerequisites
| Prerequisite | Description | Status |
|---|---|---|
| Computer Access | Requires computer access be setup | Check Your Status |
| Funding Source | Requires permission to an active funding source | Check Your Status |
| Work Plan | Requires a work plan be approved by PI and staff | Check Your Status |
| Agreement Form | Requires completed agreement form for equipment usage | Check Your Status |
| NRF Safety Training | Requires completion of safety training | Check Your Status |
| NRF Building Access | Requires issue of an id badge and entry badge and/or access level to be set. | Check Your Status |
| Equipment Training | Requires completion of equipment training | Check Your Status |
An active Gatorlink login is required to create a new reservation.