Litho Process Suss Delta 80 & Hot Plate/Oven - Status: Available

• General Information
• Prerequisites
• Calendar
• Training
• Contacts
• Documents

General Information

Current Status:

Available

Use Rates:

External Academic & Government:

$70.30/Hour

External Affiliated Commercial/Industrial:

$70.30/Hour

External Commercial/Industrial:

$93.70/Hour

External International Academic:

$93.70/Hour

Internal Standard:

$46.90/Hour

Service:

Request Service Quote. The Staff rate is $50/hour (Internal) and $55 /hour (External) in addition to the instrument rate.

Building:

NANO (0070)

Room:

Cleanroom, Photolithography (165)

In Cleanroom:

Yes

Main Contact:

Bill Lewis

Description

Description: The Litho Bay Suss Delta 80 Spinner automatically applies AZ1512 and AZ9260 photoresist. It has the unique capability of applying photoresist in a solvent rich environment; improving uniformity and extending the allowable thickness range for a single photoresist type. Other materials may be used ONLY by special request to NRF Staff. Sample sizes: fragments <4", 4" max for round substrates, 4" max for square substrates. Pump 1 resist = AZ 1512 photoresist Pump 2 resist = AZ 9260 photoresist Autosyringe dispense = available for dispensing other materials (email requests to NRF Staff)

The use of photoresist support equipment (not tracked/ charged) is built into the spinner charge rate. Support equipment includes: HMDS hotplate, soft bake hotplates, hard bake hotplates and ovens.

Capabilities

Description: The Litho Bay Suss Delta 80 Spinner automatically applies Shipley S1813 and AZ9260 photoresist. It has the unique capability of applying photoresist in a solvent rich environment; improving uniformity and extending the allowable thickness range for a single photoresist type. Other materials may be used ONLY by special request to NRF Staff. Sample sizes: fragments <4", 4" max for round substrates, 4" max for square substrates. Pump 1 resist = Shipley S1813 photoresist Pump 2 resist = AZ 9260 photoresist Autosyringe dispense = available for dispensing other materials (email requests to NRF Staff)

The use of photoresist support equipment (not tracked/ charged) is built into the spinner charge rate. Support equipment includes: HMDS hotplate, soft bake hotplates, hard bake hotplates and ovens.